Picture of Polident Full Denture PMMA Discs

Sorry - this product is no longer available

Polident Full Denture PMMA Discs

POLIDENT FULL DENTURE PMMA CAD-CAM DISCS can be used to mill digitally designed highly esthetic and functional full dentures.

Characteristics

Discs could be used for immediate load implant denture as a long term provisional in combination with denture teeth and titanium connectors.

The denture bases and other structures are designed in CAD Software.

A 5-Axis milling machine is required, to reach undercut areas.

Teeth can be milled directly or used in conjunction with artificial teeth which are attached on denture base with PMMA resin or light curing composite material with proper primer.

Diameter: 95 – 105 mm. Thickness: 30mm (denture base layer 18mm, dentin layer 12mm).

Indications:  full dentures

Shades: Pink / dentin layer: A1, A2, A3. Other shades available upon request.

SKU: DEN-POLI-DENTURE
*
$95.25
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

POLIDENT PINK CAD-CAM DISCS

Characteristics

Discs could be used for immediate load implant denture as a long term provisional in combination with denture teeth and titanium connectors.

The denture bases and other structures are designed in CAD Software.

A 5-Axis milling machine is required, to reach undercut areas.

Teeth can be milled directly or used in conjunction with artificial teeth which are attached on denture base with PMMA resin or light curing composite material with proper primer.

NOTE:

An offset of about 1.0mm should be designed in the gum area around the teeth margin to be later covered with pink cold-curing acrylate or composite.  The amount of the material should be think enough to caver the line between the pink and dentin to a sure the end result has a naturaly looking transition of pink to white.

MATERIAL:

Polident Pink CAD/CAM discs are made of polymethylmethacrylate (PMMA) with inorganic pigments.

 

Vickers hardness: 26,60 HV.

Flexural strength: 114 MPa.

E-Module: 2771 MPa.

Residual monomer: < 1%.

Diameter: 95 – 105 mm. Thickness: 30mm. (denture base layer 18mm, dentin layer 12mm).

Indications:  full dentures, partial dentures

Shades: Pink / dentin layer: A1, A2, A3.  Other shades available upon request.

Customers who bought this item also bought
Picture of Polident Multilayer PMMA Discs

Polident Multilayer PMMA Discs

POLIDENT MULTILAYER PMMA CAD-CAM DISCS are ideal for obtaining a perfect color effect of temporary crowns and bridges in a single step.

These multi-layered discs are produced with 5 gradient layers in colors of: enamel, dentin and cervical to provide a natural look.

Benefits: Strength and Stability, High Luster Polish-ability, Excellent Machinability, Absolute Bio-compatibility.

SAVE UP TO 10% BY ORDERING ONLINE


$96.75 $61.55
Picture of 5X300/400 OEM Zirconia Tool D1.0xL16x50 Ballnose Endmill

5X300/400 OEM Zirconia Tool D1.0xL16x50 Ballnose Endmill

5X300/400 OEM Zirconia Tool D1.0xL16x50 Ballnose Endmill
$64.00
Picture of Suprême LT Glass-ceramic Blocks

Suprême LT Glass-ceramic Blocks

Suprême.cad is a kind of lithium disilicate glass- ceramic block which is suited for CAD/CAM applications.

Suprême.cad is packaged in sets of (5) in size 15-12-10 and packaged in sets of (4) for size 50-15-15.

Material Properties
Popular in chair-side system restorations for its outstanding aesthetics, dental lithium disilicate glass-ceramics (CAD/CAM) has lower hardness before crystallization and can be quickly milled to a crown. The final strength is greater than 300Mpa after crystallization.

This material can be utilized for high-efficiency aesthetic restorations such as: veneers, inlays, onlays, partial crowns, anterior crowns, posterior crowns etc.

This form of ceramic block is utilized in a CAD/CAM system in a crystalline state (with a lilac color appearance) which is manufactured on a CNC milling machine utilizing a grinding technique.

After milling is completed, a porcelain furnace is used to crystallize the material at a temperature of 840-850°C yielding a restoration with a bi-axial flexural strength between 300Mpa-420Mpa.

Suprême UP-CAD blocks have been divided into two categories according to their respective translucency characteristics：
  • HT - High Translucency, VA-VD 16 color system: A1/A2/A3/A3.5/B1/B2/BL1/BL2
  • LT - Low Translucency, VA-VD 16 color system: A1/A2/A3/A3.5/B1/B2/C1/C2/D2/BL1/BL2

Download the Usage Instructions

Download the Brochure

Download the Material Saftey Data Sheet



Suprême UP-CAD is packaged in sets of (5) in size 15-12-10 and packaged in sets of (4) for size 50-15-15.
$79.50
Picture of Polident PMMA Shaded Discs

Polident PMMA Shaded Discs

POLIDENT PMMA CAD-CAM DISCS are suitable for fabrication of splints, temporary crowns and bridges and for verifying the restoration on the plaster model / in mouth before the final milling process.

PMMA-poly methyl methacrylate is primarily designed for production of long or short term temporary restorations. Available in various shades, this material serves well for clinical as well as laboratory needs.

Benefits: Strength and Stability, High Luster Polish-ability, Excellent Machinability, Absolute Bio-compatibility and Stain-able.

Shades: A1, A2, A3, B1, B2, B3, BL1, BL2, BL3, CLEAR, enamel colous - E1, E2*.

*Upon request we can supply also other shapes, diameters and designs.

SAVE UP TO 11% BY ORDERING ONLINE



$40.90 $25.58
Only registered users can write reviews